LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> Q7 4.2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Final Drive & Differential - Transfer Case 0BU, Front Final Drive 0BM, 0C1, 0BN & Rear Final Drive 0BP) >> 39 Final Drive, Differential >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Component Bolt Size Nm
Drive Axle center bearing   20
Rear subframe, nut 1   90 + 90°
Transmission fluid filler plug to the rear final drive   35
Tunnel Brace   60
  • 1 Replace


Component Bolt Size Nm
Front final drive
Front subframe, nut/bolts 1   90 + 90°
Lock plate 1   30 + 90°
Transmission fluid filler plug to the front final drive   35
  • 1 Replace
scientia non olet · About LEMON Manuals