Seal For Flange/Driveshaft On Front Final Drive, Replacing (Final Drive Removed): Notes
WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Puller - Unit InjectorT10055
- Seal Installer - Front Final Drive Input ShaftT10430 with T10430/1
- Two 4 mm screws
- Sealing GreaseG 052 128 A1
- Front final drive designation and allocation. Refer to FRONT FINAL DRIVE DESIGNATION 0BM AND 0C1 .