Left Flange Shaft Seal, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Securing Slide Hammer VW 771 To Left Flange Shaft

Courtesy of AUDI OF AMERICA, LLC

-- Remove the front final drive. Refer to FRONT FINAL DRIVE, REMOVING AND INSTALLING .

-- Attach the Slide Hammer SetVW 771 to the left flange shaft.

-- Remove the left flange shaft.

-- Remove the flange shaft seal using the Slide Hammer SetVW 771 and the Slide Hammer Set - HookVW 771/37.

Fig 2: Pulling Out Sealing Ring For Flange Shaft Using Slide Hammer-Complete Set VW 771 And Additional Part For VW 771 771/37

Courtesy of AUDI OF AMERICA, LLC