LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> Q7 4.2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Final Drive & Differential - Transfer Case 0BU, Front Final Drive 0BM, 0C1, 0BN & Rear Final Drive 0BP) >> 39 Final Drive, Differential >> Rear Driveshaft >> General Information

General Information

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

General Repair Instructions. Refer to GENERAL REPAIR INFORMATION .

Driveshaft CV joints may only be moved without force and only as far as their stops, which is a 10° angle.

Do not kink the rear Drive Axle, only store and move when fully extended and with the bracket for the intermediate bearing facing up.

Repair work must not be performed on the Driveshaft.

scientia non olet · About LEMON Manuals