Front Driveshaft, Removing And Installing: Notes
WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Engine/Gearbox JackVAG 1383A
- Engine/Gearbox Jack - Gearbox SupportT10337
- Pry lever approximately 600 mm (for example, Hazet 652-24)