LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> Q7 4.2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Final Drive & Differential - Transfer Case 0BU, Front Final Drive 0BM, 0C1, 0BN & Rear Final Drive 0BP) >> 39 Final Drive, Differential >> Bonded Rubber Bushing On Front Final Drive, Replacing >> Bonded Rubber Bushing On Left Housing, Removing And Installing >> Removing

Bonded Rubber Bushing On Left Housing, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Tool Assembly To Remove Bonded Rubber Bushing
GWWN39-10496Courtesy of AUDI OF AMERICA, LLC

-- Set the Pneumatic/Hydraulic Foot PumpVAS 6179 to the smallest setting.

-- Remove the bonded rubber bushing.

NOTE:

Pressure washer -A- from the Final Drive Bushing Assembly Tool KitT10435

scientia non olet · About LEMON Manuals