Intake Manifold - Tightening Specification and Sequence
WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, and 2013 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of AUDI OF AMERICA, LLC
-- Tighten bolts in 3 stages as follows:
| Stage |
Bolts |
Tightening Specification |
| 1. |
-1 through 4- and -arrows- |
Install all the way in by hand. |
| 2. |
-1 ••• 4- |
5 Nm in sequence shown |
| 3. |
-Arrows- |
9 Nm in any sequence |