LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> Q7 4.2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (3.0L - Diesel Fuel Injection - Engine Code: CNRB) >> 23 Diesel Fuel Injection >> Specifications >> Fastener Tightening Specifications >> Fuel Pressure Sensor -G247- Tightening Specifications

Fuel Pressure Sensor -G247- Tightening Specifications

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, and 2013 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Fuel Pressure Sensor -G247- - Tightening Specification
GWWA23-10535Courtesy of AUDI OF AMERICA, LLC

-- Tighten Fuel Pressure Sensor -G247- in 4 steps as described below:

NOTE:

Do not use an open-end wrench for opening or tightening.

Stage Tightening Specification
1. Install all the way in by hand.
2. 60 Nm
3. Turn back 180°
4. 85 Nm