Fuel Pressure Regulator Valve -N276- - Tightening Specification
WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, and 2013 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Align the Fuel Pressure Regulator Valve -N276- such that connecting the harness connector -arrow- does not cause the electrical wiring to be placed under tension.
-- Counterhold the housing hex bolt to tighten union nut on regulator valve in 4 stages as follows:
| Stage | Tightening Specification |
|---|---|
| 1. | Install all the way in by hand. |
| 2. | 60 Nm |
| 3. | Turn back 90° |
| 4. | 85 Nm |