Special Tools
WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, and 2013 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Pry Lever - Rmv Outside Mirror80-200
- Hose Clamps Up to 25 mm Diameter3094
- Crankshaft Holder3242
- Ring Spanner 7-Piece Set3337
- PullerT10055 with AdapterT10055/1 and AdapterT10055/3
- Guide SleeveT10377
- SocketT40055
- SocketT40058
- Socket 27 mmT40218
- Locking PinT40245
- Counter Holder ToolT40248 or Counter Holder ToolT40292 (different adapters are used depending on the date of manufacture)
- Torque Wrench 5-50 NmV.A.G 1331
- Ratchet, ReversibleV.A.G 1331/1
- Tool Insert, AF 17V.A.G 1331/6
- Hot Air BlowerVAS 1978/14A -1- with nozzle attachment -2- taken from the Wiring Harness Repair SetVAS 1978 B
- Small commercially available locking pliers -3-
- Hand Vacuum PumpVAS 6213
- Tester for Fuel Return SystemVAS 6330
- Hose Clip PliersVAS 6362
- Breakout Box w/ Detachable terminals (196 pins)VAS 6606
- Break Out Box, 198-pinVAS 6606/1-1
- Break Out Box, 198-pinVAS 6606/1-2
- Break Out Box, 198-pinVAS 6606/1-3
- Foil VAS 6606/1-1
- Foil VAS 6606/2-1
- Foil VAS 6606/3-1
- Cable Set VAS 6606/7-1 and VAS 6606/7-2
- Return Flow MeterVAS 6684
- Not illustrated:
- Tool Insert, AF 17V.A.G 1331/6
- Cleaning SetVAS 6811
- Pressure Tester (Diesel) kit VAS 6551
- Connection CableVAS 6551/5-2
- Return Flow MeterVAS 6684