LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> Q7 4.2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (3.0L - Diesel Fuel Injection - Engine Code: CNRB) >> 23 Diesel Fuel Injection >> General Information >> Safety Precautions And Clean Working Conditions >> Adapting Adaptation Value After Draining Reducing Agent Or Replacing Components

Adapting Adaptation Value After Draining Reducing Agent Or Replacing Components

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, and 2013 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

The adaptation value in the Engine Control Module (ECM) must be adapted with the Vehicle Diagnostic Tester when the reducing agent is drained or one of the components listed below is replaced.

-- Perform adaptation using the Vehicle Diagnostic Tester under "01-Adapting reducing agent tank adaptation values".

scientia non olet · About LEMON Manuals