WIRE AND COMPONENT CHECK USING Breakout Box w/ Detachable Terminals (196 pins) VAS 6606: Notes
WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, and 2013 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Breakout Box w/ Detachable terminals (196 pins)VAS 6606
- Break Out Box, 198-pinVAS 6606/1-1
- Break Out Box, 198-pinVAS 6606/1-2
- Break Out Box, 198-pinVAS 6606/1-3
- Foil VAS 6606/1-1
- Foil VAS 6606/2-1
- Foil VAS 6606/3-1
- Cable Set VAS 6606/7-1 and VAS 6606/7-2
NOTE:
Always make sure the cables are connected correctly.
Never use any damaged or worn tools or accessories.
See operating instructions.
-- Connect both cable sets VAS 6606/7-1 and VAS 6606/7-2 completely to the 3 breakout boxes VAS 6606.
-- Use the following sheets:
- Foil VAS 6606/1-1 for the Break out box, 198-pinVAS 6606/1-1
- Foil VAS 6606/2-1 for the Break out box, 198-piVAS 6606/1-2
- Foil VAS 6606/3-1 for the Break out box, 198-pinVAS 6606/1-3
NOTE:
Make sure all connection bridges are connected completely on all breakout boxes.