Engine Speed Sensor -G28-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal.
- Tightening specification, refer to OVERVIEW - IGNITION SYSTEM .
-- Install the subframe, refer to Front Suspension .
-- Install the universal joint on steering gear, refer to Steering .
-- Install the noise insulation, refer to Exterior Equipment .
-- On a vehicle with air suspension, deactivate vehicle lift mode, refer to Self-Leveling Suspension .