LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> Q7 4.2 >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Final Drive & Differential Systems (Rear Final Drive, Transfer Case - 0AQ, Transmission - 0ATA,08DA,09DA,0BQA) >> 39 Final Drive, Differential >> Removal And Installation >> Installation Position Of Bonded Rubber Bushing

Installation Position Of Bonded Rubber Bushing

Bonded rubber bushings with 2 recesses

-- The recesses in the bushing must be vertical relative to final drive -arrows-.

Fig 1: Bonded Rubber Bushing, Installation Position
GWWN39-1241Courtesy of AUDI OF AMERICA, LLC

Bonded rubber bushings with 4 recesses

The smaller recesses -arrows- and smaller holes -A- of bushings must be vertical relative to final drive.

Fig 2: Bonded Rubber Bushings With 4 Recesses
GWWN39-10202Courtesy of AUDI OF AMERICA, LLC


Bonded rubber bushings with 2 recesses

-- The recesses in the bushing must be vertical relative to final drive -arrows-.

Fig 1: Bonded Rubber Bushing, Installation Position
GWWN39-1241Courtesy of AUDI OF AMERICA, LLC

Bonded rubber bushings with 4 recesses

The smaller recesses -arrows- and smaller holes -A- of bushings must be vertical relative to final drive.

Fig 2: Bonded Rubber Bushings With 4 Recesses
GWWN39-10202Courtesy of AUDI OF AMERICA, LLC