LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> Q7 4.2 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Exterior - Exterior Equipment >> 66 Exterior Equipment >> Wheel Housing Liners >> Rear Wheel Housing Liners, Removing And Installing

Rear Wheel Housing Liners, Removing And Installing

NOTE:

To remove rear wheel housing liner, it is not necessary to remove rear wheel through strong shock absorber rebound.

Fig 1: Rear Wheel Housing Liners
GWWA66-10105Courtesy of AUDI OF AMERICA, LLC
  1. Nut
    • 1.5 Nm
  2. Rear Wheel Housing Liner

    -- To remove, remove all screws and nuts.

    -- Remove wheel housing liner under side panel and raise over rear wheel out of wheel housing.

  3. Bolt
    • 1.5 Nm
scientia non olet · About LEMON Manuals