LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> Q7 4.2 >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Upholstery & Covers >> 74 Seat Upholstery, Covers >> Covers And Cushion, Power Front Seats (Comfort Seat With Or Without Memory Function) >> Seat Heating Element, Removing And Installing >> Installing

Seat Heating Element, Removing And Installing: Installing

-- Align new heating element on backrest cushion.

CAUTION:
  • Make sure the new heating element is affixed to the old heating element.
  • Remove the protective foil off the heating element in the affixing sequence.
  • When removing the protective film, make sure the heating element is not damaged and that it is attached without wrinkles.

-- Bond the individual areas of the heating element in the sequence -A, B, C and D-.

-- Route the connecting wires to the individual heating surfaces in the base of the gaps -arrows-.

-- Pull electrical wire -2- through the slit in cushion -1-.

Install in reverse order of removal.

scientia non olet · About LEMON Manuals