Headlamps, Adjusting

• When driving in countries where the vehicle is to be driven on the other side of the road, both headlamps must be partially covered with correspondingly formed covers so as to prevent asymmetric low beams from dazzling.
• There are different covers available for Installation on headlamp lenses to adapt from right hand to left hand drive vehicles and vice versa.

Procedure

-- Clean headlamp glasses and dry them.

Headlamp Driver's Side:

Fig 1: Removing Protective Foil From Cover Piece

Courtesy of AUDI OF AMERICA, LLC

-- Remove protective foil from adhesive bands on cover piece.

-- Position cut-out on upper edge of cover piece -1- on headlamp lens tab -arrow-.

-- Press cover piece with adhesive strips onto lens.

Headlamp Passenger's Side:

Fig 2: Removing Protective Foil From Cover Piece

Courtesy of AUDI OF AMERICA, LLC

-- Remove protective foil from adhesive bands on cover piece.

-- Position cut-out on upper edge of cover piece -1- on headlamp lens tab -arrow-.

-- Press cover piece with adhesive strips onto lens.