BELT PULLEY, REMOVING AND INSTALLING, "Denso" A/C COMPRESSOR, VERSION "2": Notes
A/C compressor without A/C Clutch -N25-
NOTE:
Courtesy of AUDI OF AMERICA, LLC
Observe notes on replacing belt pulley. Refer to OVERVIEW - BELT PULLEY, "Denso" A/C COMPRESSOR, VERSION "2" .
Perform preparatory work as for removing belt pulley. Refer to PRELIMINARY WORK FOR REPLACING BELT PULLEY .
The belt pulley is made of plastic and is sensitive to impact, therefore take special care when handling it.
If overload safeguard of drive plate -C- has triggered, drive plate can be pried off from belt pulley -D- after removing circlip -A-
To optimize noise reduction, a circlip -A- with a rubber disc vulcanized on it is installed. Refer to OVERVIEW - BELT PULLEY, "Denso" A/C COMPRESSOR, VERSION "2" .