Overview - Engine Oil Cooler
WARNING: This page is about a different car, the 2016 Volkswagen Touareg and 2015 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Engine Oil Cooler, Coolant Shut-Off Valve
- Seals
- For the mounting plate
- Mounting Plate
- For the engine oil cooler
- Bolt
- 9 Nm
- Seal
- Replace after removing
- For the engine oil cooler
- Bolt
- 9 Nm
- Engine Oil Cooler
- Removing and installing. Refer to ENGINE OIL COOLER, REMOVING AND INSTALLING .
- Coolant Shut-Off Valve
- Removing and installing. Refer to COOLANT SHUT-OFF VALVE, REMOVING AND INSTALLING .
- Bolt
- Tightening specification -item 3- OVERVIEW - COOLANT SHUT-OFF VALVE - List Item: Bolt .
- Seal
- Replace after removing
- For the shut-off valve
Engine Oil Cooler Thermostat
- Cover
- For the temperature regulator for the engine oil cooler
- Removing and installing. Refer to ENGINE OIL COOLER THERMOSTAT, REMOVING AND INSTALLING .
- Bolt
- 3 Nm +90° turn
- Replace after removing
- O-Ring
- Replace after removing
- Engine Oil Cooler Thermostat
- Removing and installing. Refer to ENGINE OIL COOLER THERMOSTAT, REMOVING AND INSTALLING .
- Sealing Flange
- Belt pulley side
- Removing and installing. Refer to SEALING FLANGE, REMOVING AND INSTALLING, BELT PULLEY SIDE .