Differentiation of separate or combined oil systems
WARNING: This page is about a different variant/trim than selected.
Transmission with combined oil system:
Fig 1: Transmission Oil Cooling, Return Line, Supply Line, Transfer Case, Protective Pipe & Front Final Drive
- The oil spaces in front final drive and transfer case are combined together via return line - 2 - , supply line - 4 - and protective pipe - 5 -.
- The side shaft runs in gear oil in protective pipe.
- An additional transmission oil cooler - 1 - for transfer case - 3 - and front final drive - 6 - is attached to the transmission.
Transmission with separated oil system:
- These do not have return and supply lines and transmission oil cooler
- The protective pipe is free of oil, the transfer case and the front final drive as sealed with a shaft seal to side shaft.