Actuator mechanism for manual release, removing and installing

WARNING: This page is about a different variant/trim than selected.

Removing

Shift mechanism function unit removed.

Fig 1: Actuator Mechanism For Manual Release

GW00029338

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove bolts - 1 - and remove actuator mechanism.

Installing

To assemble actuator mechanism, insert sliding bracket - 3 - with tabs - arrows A - into cut-outs - arrows B - of cover - 2 -.
Clip end of Bowden cable - 4 - into sliding bracket and bracket into cover.
Secure assembled actuator mechanism to shift mechanism function unit.

Flat part - arrow C - faces toward connecting wires.

Bolt tightening torque - 1 - : → Selector mechanism, servicing, assembly overview