Selector lever handle, removing and installing

Removing 

• Place selector lever in position "D".

Fig 1: Selector Lever Handle, Removing/Installing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Turn sleeve - 1  - clockwise until engagement is felt.
• Slide sleeve - 1  - downward.
• Pull handle - 2  - off selector lever.

Installing 

• Place selector lever in position "D".
• Thread sleeve onto selector lever.
• Press handle - 2  - onto selector lever up to stop.

• Installation position: Button facing driver.

• Push and twist sleeve - 1  - upward until tabs of sleeve engage in slots of the handle.
• Turn sleeve - 1  - counter-clockwise until engagement is felt.