Gear oil - capacities
WARNING: This page is about a different variant/trim than selected.
Transmission with combined oil system:
Fig 1: Transmission Oil Cooling, Return Line, Supply Line, Transfer Case, Protective Pipe & Front Final Drive
- The oil spaces in front final drive and transfer case are combined together via return line - 2 - , supply line - 4 - and protective pipe - 5 -.
- The side shaft runs in gear oil in the protective pipe.
- A additional heat exchanger for transmission oil cooling - 1 - for transfer case - 3 - and front final drive - 6 - is attached to the transmission.
There is approx. 300 ml of additional gear oil in the transmission oil cooling heat exchanger - 1 - with supply and return line, follow oil level check exactly.
Front final drive
| Capacities | Front final drive | Automatic transmission |
|---|---|---|
| Initial filling | 1.2 liters | 09E |
| Changing |
|
|
| Lubricant | Gear oil Observe allocation! |
Allocation of various gear oil part numbers to corresponding transmission code:
CAUTION:
- Various types of gear oil are available for this transmission.
- Other oils can cause malfunctions or transmission failure.
Gear oil level in front final drive, checking and topping off → Gear oil in automatic transmission .
Transfer case
| Capacities | Transfer case | Automatic transmission |
|---|---|---|
| Initial filling | 1.1 liters | 09E |
| Changing |
|
|
| Lubricant | Gear oil Observe allocation! |
Allocation of various gear oil part numbers to corresponding transmission code:
CAUTION:
- Various types of gear oil are available for this transmission.
- Other oils can cause malfunctions or transmission failure.
Gear oil level in transfer case, checking and topping off → Gear oil in automatic transmission .