Technical data
WARNING: This page is about a different variant/trim than selected.
| Engine code | BSB 6.0 L 331 kW/450 hp | ||
|---|---|---|---|
| Idle speed - cannot be adjusted, regulated by idle stabilization | 520 to 770 RPM | ||
| Engine speed (RPM) limitation by closing throttle plate | 6200 RPM | ||
| Fuel pressure at idle RPM | Vacuum hose connected | about 3.5 bar positive pressure | |
| Vacuum hose disconnected | about 4.0 bar positive pressure | ||
| Residual pressure after 10 minutes | min. 2.5 bar pressure | ||
| Fuel injector | Spray pattern | Multi-hole nozzle/same for all fuel injectors | |
| Fuel injection quantity(30 seconds) | 121 to 131 ml | ||
| Resistance (room temperature at 20 °C) * See note | 13 to 16 Ω | ||
* With an engine at operating temperature, resistance of fuel injectors increases by approx. 4 to 6Ω.