Right front muffler, removing and installing
WARNING: This page is about a different variant/trim than selected.
Removing
- Activate vehicle lifting mode → 43 - Self Leveling Suspension .
- Loosen quick-release fasteners - 2 - and remove rear sound insulation.
- Loosen right clamping sleeve - 2 -.
- Remove bolt - right arrow - at retaining strap for right front exhaust pipe.
NOTE:
- Decoupling elements at front mufflers must not be bent more than 10° danger of damage!
- Remove nuts - arrows -.
- Remove right front muffler with decoupling elements.
Installing
Installation is in reverse order of removal. Note the following:
NOTE:
- Replace gaskets and self-locking nuts.
- Align exhaust system free of tension → Exhaust system, installing free of tension .
- Deactivate vehicle lifting mode → 43 - Self Leveling Suspension .
Tightening torques
| Component | Nm |
|---|---|
| Front muffler to exhaust manifold with catalytic converters | 25 * See note |
| Front muffler to bracket | 25 * See note |
*Replace self-locking nuts.