Fan shroud, removing and installing: Removing
WARNING: This page is about a different variant/trim than selected.
- Drain coolant → Cooling System, Draining and Filling .
- Remove radiator → Radiator, removing and installing .
- Disconnect electrical harness connector - arrow - for coolant fans.
- Move wiring on back of lock carrier clear.
- Remove air guide at left and right - arrows -.
- Release both fan shroud retaining pins and remove by pulling upward - arrows -.
- Pivot fan shroud forward at upper edge.
- Disconnect electrical connection - arrow - for coolant fan by reaching behind fan shroud.
- Remove fan shroud.