Coolant fan, removing and installing
WARNING: This page is about a different variant/trim than selected.
Removing
- Drain coolant → Cooling System, Draining and Filling .
- Remove radiator → Radiator, removing and installing .
- Remove fan shroud → Fan shroud, removing and installing .
- Remove bolts - arrows -.
- Unclip electrical harness connectors and move wiring clear.
- Remove coolant fan.
Installing
Installation is in reverse order of removal. Note the following:
- Install fan shroud. Installing
- Install radiator. Installing
- Fill with coolant →Filling under Cooling System, Draining and Filling
Tightening torque
| Component | Nm |
|---|---|
| Coolant fan to fan shroud | 10 * See note |
* Replace bolt.