LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> A8 Quattro >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (6.0L - Engine Mechanical, Engine Code(S): BSB) >> 17 - Engine - Lubrication >> Lubrication system components, removing and installing >> Engine Oil Cooler, Removing and Installing >> Engine Oil Cooler, Removing and Installing

Engine Oil Cooler, Removing and Installing

WARNING: This page is about a different variant/trim than selected.

Removing 

NOTE:
  • Place a rag under the oil filter housing to catch escaping engine oil and coolant.
Fig 1: Engine Oil Cooler Bolts
GW00029204Courtesy of VOLKSWAGEN UNITED STATES, INC.

Installing 

Installation is in reverse order of removal. Note the following:

NOTE:
  • Replace seals.

Tightening torque 

Component Nm
Engine oil cooler to oil filter bracket 10
scientia non olet · About LEMON Manuals