End pipe, replacing
WARNING: This page is about a different car, the 2006 Audi A8, 2005 Audi A8, and 2004 Audi A8. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of VOLKSWAGEN UNITED STATES, INC.
- Separate end pipe - 1
- at section point - C
- using chain pipe cutter VAS 6254.
- Connect end pipe - 3
- up to marking - A
- so that slot on end pipe lines up with marking - B
-.
- Tighten bolts on double clamp - 2
-.