Oil pump, removing and installing

WARNING: This page is about a different car, the 2006 Audi A8, 2005 Audi A8, and 2004 Audi A8. However, it is still accessible from the selected car via links, so may be relevant.

Removing

Remove lower section of oil pan → Lower part of oil pan, removing and installing .

Fig 1: Removing Baffle Plate

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove baffle plate - arrows -.

Fig 2: Securing Chain Tensioner For Oil Pump Using An Angled Piece Of Wire & Remove Bolt

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Secure chain tensioner for oil pump using an angled piece of wire - 2 -.
Remove bolt - 1 - and pull off chain sprocket from oil pump.

Fig 3: Removing Oil Pump

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove oil pump - arrows -.

Installing

Installation is in reverse order of removal, note the following:

Note installation position of chain sprocket for oil pump.

Installed location: Marking points toward front.

Install oil pan (lower part) → Lower part of oil pan, removing and installing .

Torque specifications

Component	Nm
Oil pump to upper part of oil pan	30
Chain sprocket to oil pump	34
Baffle plate to upper part of oil pan	10
Oil drain plug	50