Axial clearance, measuring
WARNING: This page is about a different car, the 2006 Audi A8, 2005 Audi A8, and 2004 Audi A8. However, it is still accessible from the selected car via links, so may be relevant.
Special tools, testers and auxiliary items required
- Dial gauge holder VW 387
- Dial gauge
Fig 2: Attaching Dial Indicator Together With VW387 Dial Gauge Holder To Cylinder Block And Set Indicator Against Crankshaft Counterweight
- Attach dial gauge with dial gauge holder VW 387 to cylinder block and set against crankshaft counterweight.
- Press crankshaft against dial indicator by hand, set indicator to - 0 -.
- Press crankshaft away from dial gauge.
- Read value:
| New clearance | Wear limit |
|---|---|
| 0.07 to 0.23 mm | 0.25 mm |