Rear Window Switch, Removing and Installing
Removing
- Switch off ignition and remove ignition key.
- Remove rear door trim → 70 - INTERIOR TRIM .
- Detach insulating mat from door trim.
- Remove bolts - arrows - and detach armrest.
- Remove bolt - arrow - and detach switch mount - 1 - from armrest.
- Remove bolts - arrows - and detach switch mount with window regulator switch.
- Disconnect electrical connector - 2 -.
- Carefully release catches - arrows - using a small screwdriver.
- Remove Left Rear Window Switch (In LR Door) E52/E54 - item 1 - downward out of switch mount.
Installing
Install in reverse order of removal, observing the following:
- Press switch into switch mount until fasteners engage.
- Install rear door trim → 70 - INTERIOR TRIM .