Notes on repairs on airbag and belt tensioner wiring harness
CAUTION:
- Repairs on airbag and belt tensioner wiring harness must be performed exclusively on vehicle side using wiring harness repair kit VAS 1978 and original replacement parts (connector housing, terminals, wires) in order to guarantee the repair quality required by Audi AG.
- Wires at individual airbag modules may not be repaired.
- If wires or harness connectors at airbag modules are damaged, the respective airbag module must be replaced for safety reasons.
- Repairs are to be documented in the Audi Service Plan under "Space for workshop entries" with a short commentary of scope of repairs, workshop stamp and signature.
- Any warranty claims to Audi AG are void for repairs on airbag wiring harness which were not performed using original replacement parts and wiring harness repair kit VAS 1978.