Mirror adjustment switch, removing and installing

Fig 1: Identifying Retaining Spring, Electrical Harness Connector, Bracket, And Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Removing 

• Remove front door trim → 70 - INTERIOR TRIM REMOVAL AND INSTALLATION .
• Release retaining spring - 1  - and push electrical harness connector - 2  - out of bracket - arrow  -.
• Disconnect electrical harness connector at mirror adjustment switch.
• Remove bolts - 3  - and - 4  - and - 6 12  -.

• Remove armrest and disconnect electrical harness connector - 5  - for window regulator switch.

Fig 2: Removing Bolts And Switch Mount Cover From Armrest

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove bolts - arrows  -.
• Remove switch mount cover - 1  - from armrest.

Fig 3: Identifying Electrical Harness Connector, Mirror Adjustment Switch, And Catches

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Disconnect electrical harness connector - 1  - at mirror adjustment switch - 2  -.
• Carefully release catches - arrows  - using a small screwdriver.
• Pull mirror adjustment switch downward out of switch mount.

Installing 

Installation is performed in reverse order of removal, noting the following:

Tightening torques