Front interior light module, removing and installing

Fig 1: Garage Door Opener Control Head E284

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Removing 

• Open eyeglass compartment - 1  - and release center covers - 2  - and - 3  - of interior/reading light - arrow  -.

Fig 2: Releasing Diffusion Lens For Interior/Reading Light

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Release diffusion lens - 1  - for interior/reading light - arrow  -.

Fig 3: Identifying Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove bolts - arrows  -.
• Pivot front interior light downward and remove from roof trim.

Installing 

Installation is performed in reverse order of removal, noting the following:

• Engage interior light and bolt on.
• Press on interior light cover until it engages.

Tightening torque