Ashtray lighting rear doors, removing and installing

Fig 1: Disconnecting Electrical Harness Connector For Window Regulator Switch And For Ashtray Illumination

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Removing 

• Remove rear door trim → 70 - INTERIOR TRIM REMOVAL AND INSTALLATION .
• Remove bolts - arrows  -.
• Disconnect electrical harness connector - 1  - for window regulator switch and for ashtray illumination - 2  -.
• Remove armrest at door trim.

Fig 2: Releasing Clips And Removing Ashtray Illumination Toward Rear

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove insert of rear ashtray.
• Release clips - 2  - and - 3  - and remove ashtray illumination - 1  - toward rear.

Installing 

Installation is performed in reverse order of removal, noting the following:

• Press ashtray illumination into mount until catches engage.
• Install rear door trim → 70 - INTERIOR TRIM REMOVAL AND INSTALLATION .

Tightening torque