Ambient lighting LED, removing and installing

Fig 1: Identifying Electrical Harness Connectors, Clips, LED, And Interior/Reading Light

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Removing 

• Remove front interior/reading light → Front interior light module, removing and installing .
• Disconnect electrical harness connectors - 1  - and - 2  -.
• Release clips - arrows  - and remove LED for ambient lighting - 3  - and - 4  - from interior/reading light.

Installing 

Installation is performed in reverse order of removal, noting the following:

• Connect electrical harness connector.
• Install front interior/reading light → Front interior light module, removing and installing .