Parking Aid Control Module J446, removing and installing - Sedan

Fig 1: Identifying Clip, Parking Aid Control Module J446, Mounting Frame, And Electrical Harness Connectors

GW00023981

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Removing

Remove right luggage compartment side trim cover.
Release clip - arrow A - and swivel Parking Aid Control Module J446 - 4 - out of mounting frame - arrow B -.
Disconnect electrical harness connectors - 1 3 -.

NOTE:

Shown in illustration from side with trim removed.

Installing

Installation is performed in the reverse order of removal.