Washer nozzles, removing and installing

Fig 1: Unclipping Base Of Spray Jet From Bottom Of Hood

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Removing 

• Unclip washer nozzles from bottom of hood - arrow  -.

Fig 2: Identifying Hose, And Electrical Connection

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Disconnect washer fluid line - 1  - from unclipped nozzle.
• Disconnect electrical harness connector - 2  -.

Fig 3: Locating Oval Opening For Spray Individual Nozzles

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Installing 

Installation is performed in reverse order of removal, noting the following:

• When attaching water hose, make sure it engages audibly in connection of nozzle.
• Insert nozzle in hood.

• Oval opening - arrow  - for single nozzle must point toward outside of vehicle.