Overview - SUBFRAME Mount

Fig 1: Engine Mount Exploded View

Courtesy of AUDI OF AMERICA, LLC

Bolt
- 20 Nm
Retaining Plate
- For the engine mount
- Replace when replacing the engine mount
Bolt
- 40 Nm
Engine Support
Bolt
- 10 Nm
Heat Shield
Bolt
- 90 Nm +90° additional turn
- Replace
Engine Mount
- Removing and installing. Refer to LEFT ENGINE MOUNT, REMOVING AND INSTALLING for left side and RIGHT ENGINE MOUNT, REMOVING AND INSTALLING for right side.
- Replace in pairs on the left and right
Subframe
Bolt
- 55 Nm