DVD Player Retaining Plate, Removing And Installing: Installing: Notes

Install In Reverse Order Of Removal While Noting The Following: 

-- Pull Washer -3- Up And Slide Socket -4- From The Side Into Mount -1-.

• The Socket Must Fit In The Center Of The Mount.

-- Hold The Socket In This Position And Tighten The Nut.

-- Install The Retaining Plate Hooks Into The Backrest Frame -3- -arrows-.

Fig 1: Identifying Tightening Specification, Retaining Plate For DVD Player

Courtesy of AUDI OF AMERICA, LLC

-- Tighten The Bolts.