Routing And Securing Lines
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- To avoid mistakes and to remember the original installation location, mark the lines/hoses for fuel, hydraulics, vacuum, Evaporative Emission (EVAP) system or electrical wires before removing. If necessary, make a sketch or take a picture.
- To prevent damaging the lines, make sure there is sufficient clearance in the engine compartment for all moving or hot components because of space limitation.
- Check the routing of the refrigerant lines after attachment. They must be inserted into the provided brackets and must not come in contact with other components.