Overview - Driver Side Instrument Panel Cover

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Driver Side Instrument Panel Cover

Courtesy of AUDI OF AMERICA, LLC

Light Switch -E1-
- Removing and installing. Refer to LIGHT SWITCH -E1-, REMOVING AND INSTALLING .
Bolt
- 3 Nm
- Quantity: 2
Left Front Footwell Illumination Bulb -L151-
- Equipment levels
- Removing and installing. Refer to LEFT/RIGHT FRONT FOOTWELL ILLUMINATION BULB -L151- / -L152-, REMOVING AND INSTALLING
Bolt
- 3 Nm
Side Cover
- For the instrument panel
- Removing and installing. Refer to INSTRUMENT PANEL SIDE COVER, REMOVING AND INSTALLING .
Clip
- Install in the foot rest
16-Pin Connector -T16-
- Data Link Connector (DLC)
Driver Side Instrument Panel Cover
- Removing and installing. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .
Spring Clip
- For the driver side instrument panel cover
- Quantity: 5
- Different version.
- Replace damaged or deformed spring clips
- Press correctly into the instrument panel
Lower Cover
- For the instrument panel
- Removing and installing. Refer to FRONT FOOTWELL COVER, REMOVING AND INSTALLING .
- Replace damaged or deformed spring clips on the Air Conditioning (A/C) System
Bolt
- 3 Nm
Cap
- Press into the cover