Overview - Timing Chain Cover: Notes

Fig 1: Exploded View Of Timing Chain Covers

Courtesy of AUDI OF AMERICA, LLC

Bolt
- Tightening Specification and sequence. Refer to Figure.
Crankshaft Shaft Seal, Transmission Side
- Replacing. Refer to CRANKSHAFT SEAL, REPLACING, TRANSMISSION SIDE .
Bolt
- Tightening Specification and sequence. Refer to Figure.
Alignment Sleeve
- Quantity: 2
Bolt
- Tightening Specification. Refer to -item 13) OVERVIEW - OIL FILTER/OIL PRESSURE SWITCH - Bolt .
Left Cylinder Head Gasket
Left Timing Chain Cover
- Removing and installing. Refer to LEFT AND RIGHT TIMING CHAIN COVER, REMOVING AND INSTALLING .
Bracket
- For wiring harness
Bolt
- Replace
- Tightening Specification and sequence. Refer to Figure.
Lower Timing Chain Cover
- Removing and installing. Refer to LOWER TIMING CHAIN COVER, REMOVING AND INSTALLING .
Seals
- Replace
Bolt
- Tightening Specification and sequence. Refer to Figure.
Bracket
- For the connectors
Bolt
- Replace
- Tightening Specification and sequence. Refer to Figure.
Right Timing Chain Cover
- Removing and installing. Refer to LEFT AND RIGHT TIMING CHAIN COVER, REMOVING AND INSTALLING .
Right Cylinder Head Gasket
Alignment Sleeve
- Quantity: 2
Bolt
- Tightening Specification and sequence. Refer to Figure.
Engine Speed Sensor -G28-
- Removing and installing. Refer to ENGINE SPEED SENSOR -G28-, REMOVING AND INSTALLING .
Bolt
- Tightening Specification. Refer to OVERVIEW - IGNITION SYSTEM .