Right Camshaft Timing Chain

Fig 1: Identifying Right Camshaft Timing Chain

Courtesy of AUDI OF AMERICA, LLC

Bolt
- 80 Nm +90° additional turn
- Replace
Camshaft Adjuster for Exhaust Camshaft
- Identification "Exhaust"
- Removing and installing. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
Bolt
- 80 Nm +90° additional turn
- Replace
Camshaft Adjuster for Intake Camshaft
- Identification "Intake"
- Removing and installing. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
Bolt
- 30 Nm + 90° additional turn
- Replace
Mounting Pin for the Drive Chain Sprocket
- For the right camshaft timing chain
- Asymmetrical version
- Installed position. Refer to Figure
Right Camshaft Timing Chain Drive Sprocket
- Installed position. Refer to Figure
Right Camshaft Timing Chain
- Before removing, mark the direction of rotation with paint
- Removing and installing. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
Drive Chain Sprocket Thrust Washer
- For the right camshaft timing chain
- Asymmetrical version
- Installed position. Refer to Figure
Right Camshaft Timing Chain Tensioner
- Removing and installing. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
Glide
Bolt
- 9 Nm