Cover and padding for rear seat backrest, assembly overview

Fig 1: Cover And Padding For Rear Seat Backrest, Assembly Overview

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Fastening strip

2 - Padding

3 - Staples

4 - Seat cover

• Removing 

• Remove rear seat backrest → Rear seat backrest, assembly overview .
• Remove head restraint guides → Head restraint guides, removing and installing .
• Disengage center armrest - 5  -.
• Pry off securing strip - 1  -.

• Cut through staples - 3  -.
• Fold cover - 4  - up.
• Remove cover - 4  - upward and cut through staples - 3  -.
• Remove padding - 2  -.

• Installing 

• Replace staples - 3  -.
• Install cover and padding in reverse order to removal.

5 - Center armrest