Anchorage points for center floor panel, assembly overview

Fig 1: Anchorage Points For Center Floor Panel, Assembly Overview

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Belt buckle

• Removing 

• Remove rear bench seat → Rear seat bench, assembly overview .
• Remove nut - 4  -.
• Remove belt buckle - 1  -.

• Installing 

• Make sure that mounting - 2  - engages in locating projection - 3  -.
• Continue installing belt buckle - 1  - in reverse order of removal.

2 - Mounting

3 - Locating projection

4 - Nut

• Tightening torque 55 Nm