LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> A4 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 693 (3.0L - Cylinder Head & VALVETRAIN - Engine Code(S): CCBA, CGXC & CTUB (Sedan)) >> 15 Cylinder Head, VALVETRAIN >> Cylinder Head >> Cylinder Head, Removing And Installing >> Removing >> Loosen the cylinder head bolts in the sequence

Loosen the cylinder head bolts in the sequence

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2016 Audi S4, 2015 Audi S5, and 2015 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

-- Loosen the cylinder head bolts in the sequence -1 to 8-

-- Remove the bolts, remove the cylinder head and place it on a soft surface (foam).

Fig 1: Cylinder Head Bolts Loosening Sequence
GWWA15-0709Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals