LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> A4 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1548 (Cylinder Head, VALVETRAIN (Servicing) [CABB, CABA, CABD, CAEA, CAEB, CDHB, CDNB, CDNC, CDHA, CDZA, CADA, CCUA, CFKA, CPMA, CAED, CPMB, CHJA, CPEA] (Cabriolet)) >> 15 Cylinder Head, VALVETRAIN >> VALVETRAIN >> Sliding Bar Ball, Installing >> Installing

Sliding Bar Ball, Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi A5 Quattro, 2016 Audi A5 Quattro, 2015 Audi A5 Quattro, 2014 Audi A5 Quattro, and 2014 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

- Wear protective eyewear.

-- Insert the spring -1- in the camshaft.

GWWA15-11597Courtesy of AUDI OF AMERICA, LLC

-- Place the ball -2- on the spring in the camshaft.

-- Push the ball and spring downward in direction of -arrow A- using the :T40191/1  and hold.

-- Push the sliding bar -3- in the direction of -arrow B-.

scientia non olet · About LEMON Manuals