Tightening Specifications

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi A5 Quattro, 2016 Audi A5 Quattro, 2015 Audi A5 Quattro, 2014 Audi A5 Quattro, and 2014 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Oil Separator Tightening Sequence

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts to 9 Nm in the sequence -1 to 9-.

Fig 2: Crankcase Tightening Sequence

Courtesy of AUDI OF AMERICA, LLC

NOTE:

The bolts are thread-cutting. Only use original bolts when replacing the cylinder head, since the cylinder head is delivered without a thread for the installing the crankcase ventilation.

It is not permitted to cut the thread with a thread cutter.

-- Tighten the bolts in the sequence -1 to 10- to 11 Nm.